TP-Link T2600G Series - Page 833

User Guide 804
Configuring ACL ACL Configuration
■ Binding the ACL to a Port
Choose the menu SECURITY > ACL > ACL Binding > Port Binding and click
to
load the following page.
Figure 2-34 Binding the ACL to a Port
Follow these steps to bind the ACL to a Port:
1) Choose ID or Name to be used for matching the ACL. Then select an ACL from the
drop-down list.
2) Specify the port to be bound.
3) Click Create.
■ Binding the ACL to a VLAN
Choose the menu SECURITY > ACL > ACL Binding > VLAN Binding to load the following
page.
Figure 2-35 Binding the ACL to a VLAN