EasyManua.ls Logo

TP-Link T2600G Series - Page 978

TP-Link T2600G Series
1136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Monitoring Traffic Traffic Monitor
User Guide
949
Received: Displays the detailed information of received packets.
Broadcast: Displays the number of valid broadcast packets received on the port.
Error frames are not counted.
Multicast: Displays the number of valid multicast packets received on the port. Error
frames are not counted.
Unicast: Displays the number of valid unicast packets received on the port. Error
frames are not counted.
Jumbo: Displays the number of valid jumbo packets received on the port. Error
frames are not counted.
Alignment Errors: Displays the number of the received packets that have a Frame
Check Sequence (FCS) with a non-integral octet (Alignment Error). The size of the
packet is between 64 bytes and 1518 bytes.
Undersize Packets: Displays the number of the received packets (excluding error
packets) that are less than 64 bytes long.
64-Octets Packets: Displays the number of the received packets (including error
packets) that are 64 bytes long.
65-to-127-Octects Packets: Displays the number of the received packets (including
error packets) that are between 65 and 127 bytes long.
128-to-255-Octects Packets: Displays the number of the received packets (including
error packets) that are between 128 and 255 bytes long.
256-to-511-Octects Packets: Displays the number of the received packets (including
error packets) that are between 256 and 511 bytes long.
512-to-1023-Octects Packets: Displays the number of the received packets
(including error packets) that are between 512 and 1023 bytes long.
1023-to-1518-Octects Packets: Displays the number of the received packets
(including error packets) that are between 512 and 1023 bytes long.
Pkts: Displays the number of packets received on the port. Error packets are not
counted.
Bytes: Displays the number of bytes received on the port. Error packets are not
counted.

Table of Contents

Related product manuals