1 Introduction
1.2 Programming Pendant
1-14
155507-1CD
RE-CSO-A037
DX100
B. Operation Coordinate System
Displays the selected coordinate system. Switched by pressing
[COORD].
: Joint Coordinates
: Cartesian Coordinates
: Cylindrical Coordinates
: Tool Coordinates
: User Coordinates
C. Manual Speed
Displays the selected speed. For details, refer to section 2.2.0.5 “Select
Manual Speed” on page 2-4.
: Inching
: Low Speed
: Medium Speed
: High Speed
D. Security Mode
: Operation Mode
: Edit Mode
: Management Mode
E. Operation Cycle
Displays the present operation cycle.
: Step
: Cycle
: Continuous
To Next Page
Loading...
