EasyManuals Logo

H3C S3600 Series Command Manual

H3C S3600 Series
1277 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1118 background imageLoading...
Page #1118 background image
3-19
Use the undo schedule reboot command to disable the delay reboot function.
By default, the delay reboot function is disabled on the switch.
Note that:
z The switch timer is precise to one minute. When the reboot time reaches, the switch will reboot in
one minute at most.
z You can set the reboot delay in two formats: the hour:minute format and the absolute minute format,
and both must be less than or equal to 30 × 24 × 60 (that is, 30 days).
z After you execute the command, the system will prompt you to confirm. Enter "Y" or "y" for your
setting to take effect. Your setting will overwrite the previous one (if there is a setting already
exists).
z If you adjust the system time by the clock command after executing the schedule reboot delay
command, the configured schedule reboot delay command will be invalid and the scheduled
reboot will not happen.
Related commands: reboot, schedule reboot at, undo schedule reboot, display schedule reboot.
Examples
# Suppose the current time is 05:15, schedule a reboot so that the switch reboots after 70 minutes.
<Sysname> schedule reboot delay 70
Reboot system at 06:25 2000/04/02(in 1 hours and 10 minutes)
confirm?[Y/N]:y
<Sysname>
schedule reboot regularity
Syntax
schedule reboot regularity at hh:mm period
undo schedule reboot regularity
View
System view
Parameters
hh:mm: Reboot time of the switch, in the hour:minute format, where hh ranges from 0 to 24, and mm
ranges from 0 to 59.
period: Reboot period of the switch, in the format period = { daily | { monday | tuesday | wednesday |
thursday | friday | saturday | sunday }* }. daily indicates the reboot period is one day, that is, the
switch reboots at a specified time every day. { monday | tuesday | wednesday | thursday | friday |
saturday | sunday }* indicates the week day when the switch reboots.
Description
Use the schedule reboot regularity command to enable the periodical reboot of the switch and set the
reboot time.
Use the undo schedule reboot regularity command to cancel the configured reboot period.
By default, the reboot period of the switch is not configured.

Table of Contents

Other manuals for H3C S3600 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C S3600 Series and is the answer not in the manual?

H3C S3600 Series Specifications

General IconGeneral
BrandH3C
ModelS3600 Series
CategorySwitch
LanguageEnglish

Related product manuals