1-39
Description
Use the black-list add-mac command to add the specified MAC address to the cluster blacklist, so that
the device with the specified MAC address cannot join the cluster.
Use the black-list delete-mac command to remove all the MAC addresses or the specified MAC
address from the current cluster blacklist, so that all devices or the device with the specified MAC
address can join the cluster.
By default, no MAC address is added to the cluster blacklist.
You can only use this command on the cluster administrative device.
If the device to be added to the blacklist is a member of the cluster, the execution of the black-list
add-mac command will remove the device from the cluster and then add it to the cluster blacklist. In this
case, the black-list add-mac command is equivalent to the delete-member member-id to-black-list
command.
Examples
# Add the device with the MAC address 0010-3500-e001 to the blacklist.
<aaa_0.Sysname> system-view
Enter system view, return to user view with Ctrl+Z.
[aaa_0.Sysname] cluster
[aaa_0.Sysname-cluster] black-list add-mac 0010-3500-e001
# Delete all addresses in the current cluster blacklist.
[aaa_0.Sysname-cluster] black-list delete-mac all
display cluster base-members
Syntax
display cluster base-members
View
Any view
Parameters
None
Description
Use the display cluster base-members command to display the information about all the devices in
the base cluster topology, such as member number, name, MAC address, and the current status of
each device in a cluster.
Examples
# Display the information about all the devices in the base cluster topology.
To Next Page
Loading...
Need help?
General