EasyManuals Logo

TP-Link T2600G Series User Manual

TP-Link T2600G Series
1136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1079 background imageLoading...
Page #1079 background image
User Guide 1050
Notification Configurations
Step 2 snmp-server traps vlan [ create | delete ]
Enable the corresponding VLAN traps. The command without parameter enables all SNMP
VLAN traps. By default, all VLAN traps are disabled.
create: Triggered when certain VLANs are created successfully.
delete: Triggered when certain VLANs are deleted successfully.
Step 3 end
Return to Privileged EXEC Mode.
Step 4 copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to configure the switch to enable all the SNMP VLAN
traps:
Switch#configure
Switch(config)#snmp-server traps vlan
Switch(config)#end
Switch#copy running-config startup-config
Enabling the SNMP Security Traps Globally
Step 1 configure
Enter Global Configuration Mode.
Step 2 snmp-server traps security { dhcp-filter | ip-mac-binding }
Enable the corresponding security traps. By default, all security traps are disabled.
dhcp-filter: Triggered when the DHCPv4 Filter feature is enabled and the switch receives
DHCP packets from an illegal DHCP server.
ip-mac-binding: Triggered when the ARP Inspection feature is enabled and the switch
receives an illegal ARP packet, or the IPv4 Source Guard feature is enabled and the switch
receives an illegal IP packet.
Step 3 end
Return to Privileged EXEC Mode.
Step 4 copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to configure the switch to enable DHCP filter trap:
Switch#configure
Switch(config)#snmp-server traps security dhcp-filter
Switch(config)#end

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link T2600G Series and is the answer not in the manual?

TP-Link T2600G Series Specifications

General IconGeneral
ModelT2600G Series
LayerLayer 2+
TypeManaged
Uplink Ports4 x Gigabit SFP slots
VLAN4K VLANs
QoS8 priority queues
ManagementWeb-based GUI, CLI, SNMP, RMON
Standards and ProtocolsIEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3at
InterfaceRJ45
L2 FeaturesSTP, RSTP, MSTP, LACP, IGMP Snooping
L3 FeaturesStatic Routing
Security802.1X, Port Security, DHCP Snooping, IP Source Guard, DoS Defend, ARP Inspection, SSH, SSL, ACL
MAC Address Table16K
Jumbo Frame9KB
Operating Temperature0°C to 40°C
Storage Temperature-40°C to 70°C
Operating Humidity10% to 90% RH non-condensing
Storage Humidity5% to 90% non-condensing

Related product manuals