EasyManuals Logo

TP-Link T2600G Series User Manual

TP-Link T2600G Series
1136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #159 background imageLoading...
Page #159 background image
User Guide 130
Configuring DDM (Only for Certain Devices) DDM Configuration
Configuring the Bias Current Threshold
Figure 2-4 Configure Bias Current Threshold
Follow these steps to configure DDM‘s bias current threshold:
1) In the Bias Current table, select one or more SFP ports to configure bias current
threshold on the SFP ports.
High Alarm Specify the high bias current threshold for the alarm. When the operating
parameter rises above this value, action associated with the alarm will be taken.
The valid values are from 0 to 131.
Low Alarm Specify the low bias current threshold for the alarm. When the operating
parameter falls below this value, action associated with the alarm will be taken.
The valid values are from 0 to 131.
High Warning Specify the high bias current threshold for the warning. When the operating
parameter rises above this value, action associated with the warning will be taken.
The valid values are from 0 to 131.
Low Warning Specify the low bias current threshold for the warning. When the operating
parameter falls below this value, action associated with the warning will be taken.
The valid values are from 0 to 131.
LAG Displays the LAG number which the port belongs to.
2) Click Apply.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link T2600G Series and is the answer not in the manual?

TP-Link T2600G Series Specifications

General IconGeneral
ModelT2600G Series
LayerLayer 2+
TypeManaged
Uplink Ports4 x Gigabit SFP slots
VLAN4K VLANs
QoS8 priority queues
ManagementWeb-based GUI, CLI, SNMP, RMON
Standards and ProtocolsIEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3at
InterfaceRJ45
L2 FeaturesSTP, RSTP, MSTP, LACP, IGMP Snooping
L3 FeaturesStatic Routing
Security802.1X, Port Security, DHCP Snooping, IP Source Guard, DoS Defend, ARP Inspection, SSH, SSL, ACL
MAC Address Table16K
Jumbo Frame9KB
Operating Temperature0°C to 40°C
Storage Temperature-40°C to 70°C
Operating Humidity10% to 90% RH non-condensing
Storage Humidity5% to 90% non-condensing

Related product manuals