Configuring Access Security Access Security Configurations
User Guide
703
4) In the Number of Access Users section, enable Number Control function, specify the
following parameters and click Apply.
Number Control Enable or disable Number Control. With this option enabled, you can control the
number of the users logging on to the web management page at the same time.
The total number of users should be no more than 16.
Number of
Admins
Specify the maximum number of users whose access level is Admin.
Number of
Operators
Specify the maximum number of users whose access level is Operator.
Number of
Power Users
Specify the maximum number of users whose access level is Power User.
Number of
Users
Specify the maximum number of users whose access level is User.
5) In the Load Certificate and Load Key section, download the certificate and key.
Certificate File Select the desired certificate to download to the switch. The certificate must be
BASE64 encoded. The SSL certificate and key downloaded must match each
other, otherwise the HTTPS connection will not work.
Key File Select the desired Key to download to the switch. The key must be BASE64
encoded. The SSL certificate and key downloaded must match each other,
otherwise the HTTPS connection will not work.
To Next Page
Loading...
