NEC Univerge SV9100 - Figure 3-7 GPZ-BS10 Expansion Bay in Controlling Chassis; Figure 3-8 Open Base Chassis Cover

Issue 3.0
SV9100 System Hardware Manual 3-11
3. From the left side of the chassis, pull cover outward to
expose the expansion bay.
4. Pull the cover toward you to remove.
 Cover must be removed prior to installation of GPZ-BS10
blade.
Figure 3-7 GPZ-BS10 Expansion Bay in Controlling Chassis
Expansion Bay
Figure 3-8 Open Base Chassis Cover