Issue 3.0
7-22 Installing SV9100 Wireless Telephones
3.4 Charging the Battery
1. Install the handset battery as shown.
2. Use the charger AC adapter to connect the charger's AC jack to a standard
120V AC power outlet.
3. Place the handset in the charger with the display facing forward. The
HANDSET STATUS LED should turn on; if it doesn't, reseat the handset or
try plugging the AC adapter into a different outlet.
Figure 7-21 ML440 – Handset Charger
Figure 7-22 ML440 – Handset Battery Installation
To Next Page
Loading...
