NEC Univerge SV9100 - Figure 4-43 GCD-ETIA Blade

Issue 3.0
SV9100 System Hardware Manual 4-105
6.5 GCD-ETIA (Gigabit PoE Switch)
6.5.1 Description
The GCD-ETIA blade is a managed 8-port gigabit Ethernet PoE switch.
Ports 1 and 8 are the default uplink ports. All the user management and
stacking are based on this setup. This blade provides:
 8 Gigabit Ethernet (10 Base-T/100 Base-TX/1000 Base-T) Ports
 Per Port Status LED Indicating Link, Speed and Activity
 802.3af PoE on All Ports Providing up to 15.4W of Power- Selectable
level per port via web-based management interface
 Auto-MDI/MDI-X Auto Crossover (when auto-negotiation is available)
 Layer 2 Switching
 QoS
 802.1Q VLANs
 802.1p Priority Queuing
Figure 4-43 GCD-ETIA Blade