NEC Univerge SV9100 - Figure 6-39 Stowing the Bottom Unit Cable; Figure 6-40 Insert Stopper for Handset Use

Issue 3.0
6-32 Installing SV9100 Cordless Telephones
18. Cut or trim the supplied coupled device for the tilt legs handset option.
19. Insert the stopper coupled device into the right and left tilt legs (see
Figure 6-40 Insert Stopper for Handset Use).
20. Set the coupled device for tilt legs into position.
21. Reinstall the legs, pushing upwards until both locks snap into place.
22. Set tilt legs to desired position.
23. Place the multiline terminal with the numbered keypad up.
24. Connect the Line cord and the AC adapter.
Figure 6-39 Stowing the Bottom Unit Cable
Figure 6-40 Insert Stopper for Handset Use