NEC Univerge SV9100 - Figure 3-50 Secure Metal Fitting to Lower Wall Mount Bracket with Screws

Issue 3.0
SV9100 System Hardware Manual 3-43
7. Using two screws, secure the metal fitting to the lower wall mount
bracket. Refer to Figure 3-50 Secure Metal Fitting to Lower Wall
Mount Bracket with Screws for screw location.
8. Attach the supplied cable support bracket to either end of the lower
wall mount bracket with a single screw (refer to Figure 3-51 Attach
Cable Support Bracket to Lower Wall Mount Bracket on page 3-44).
Figure 3-50 Secure Metal Fitting to Lower Wall Mount Bracket with Screws