Issue 3.0
6-2 Installing SV9100 Cordless Telephones
2.1 Selecting a Location
Select a location for the D
term
Cordless DECT to avoid excessive heat or humidity.
The base unit of the D
term
Cordless DECT can be placed on a desk or tabletop
near a standard 120V AC outlet and telephone line jack. The base unit can also
be mounted on a standard wall plate using the wall mount adapter. Keep the base
unit and handset away from sources of electrical noise (motors, fluorescent
lighting, computers, PC monitor).
2.2 Installation Precautions
To ensure optimum performance follow these guidelines.
Base units must be placed at least 20 feet apart.
Always place the base unit on top of a desk or on higher shelves. Avoid
locations surrounded by metal surfaces.
Place the base away from any electrical component such as a PC, monitor and
other telephone.
Figure 6-2 System Overview
To Next Page
Loading...
