NEC Univerge SV9100 - Figure 4-42 GCD-RGA Blade

Issue 3.0
4-100 Installing the SV9100 Blades
6.4 GCD-RGA (Application Gateway)
6.4.1 Description
The GCD-RGA blade is a 4-port switch and router which complies with the
Ethernet specification for 10 Base-T, 100 Base-TX and 1000 Base-TX. This
blade is compatible in LAN applications using 10Mbps, 100Mbps and
1000Mbs. All ports automatically identify and switch 10 Base-T, 100
Base-TX, 1000 Base-TX and Full/Half-Duplex.
Each GCD-RGA blade comes with a built-in router application that provides
the following features:
 VoIP Gateway
 WAN Router:
 DHCP
 PPPoE
 Static IP
 Dynamic DNS
 Virtual Private Network (VPN)
Figure 4-42 GCD-RGA Blade
WAN
LAN
USB
Reset
Busy LED
Active LED