Issue 3.0
SV9100 System Hardware Manual 3-87
SECTION 8 BATTERY CONNECTION
Two types of battery connection provide battery life during a power failure, the
internal battery and an external battery with CHSG LARGE BATT BOX.
8.1 Installing the Internal Batteries 19” (CHS2UG-US) Chassis
An internal battery source using two batteries can be installed using the CHS2UG
BATT MTG KIT (mounting kit) and CHS2U BATT CABLE INT (internal cabling).
CHS2UG BATT MTG KIT (Backup time = 10 Minutes/24 Terminals)
1. Power down the CHS2UG-US chassis
2. Disconnect AC power and grounding cable from rear of chassis.
3. Remove screws from battery access panel on rear of chassis.
Ensure the CHS2UG-US chassis is powered OFF.
Figure 3-107 Removing Battery Access Panel
To Next Page
Loading...
