NEC Univerge SV9100 - Figure 5-66 Install Screw

Issue 3.0
SV9100 System Hardware Manual 5-67
11. Holding the LCD in place, turn the multiline terminal button
side down.
12. Install the screw (refer to Figure 5-66 Install Screw).
13. Attach the side panel to the side of the 8LKD (LD)-L UNIT
(refer to Figure 5-72 Install Screw on page 5-71).
14. Return the multiline terminal to the buttons side up.
15. Connect the line cord/LAN cable and the AC/DC adapter to
the DTL multiline terminal.
Figure 5-66 Install Screw
Side Panel
Screw