NEC Univerge SV9100 - Figure 3-126 Installing Cover Battery

Issue 3.0
3-98 Installing the SV9100 Chassis
16. Insert tabs on cover into holes on CHSG LARGE BATT BOX. Slide
the cover left until seated and tighten the screw.
8.2.3 CHSG LARGE BATT BOX to CHS2UG-US Connection
1. Power down the CHS2UG-US chassis.
2. Disconnect AC power cable from rear of chassis.
Figure 3-125 Connecting Battery Cables
Figure 3-126 Installing Cover Battery
WARNING
Ensure the CHS2UG-US chassis is powered OFF.