NEC Univerge SV9100 - Figure 3-106 Attach (CHS2 UG B-US) and (CHS2 UG E) Chassis to Rack

Issue 3.0
3-86 Installing the SV9100 Chassis
4. Connect grounding wire to chassis. Refer to paragraph 3.5.4 Install
Grounding on Multiple 9.5” Base and Expansion Chassis on page 3-37 for
complete details on grounding the system.
5. Refer to 3.5.5 Install AC Power Cord on 9.5” Base and Expansion Chassis
on page 3-37 for installation of the power cord or, Chapter 4 paragraph 2.1
Installation and Safety Precautions on page 4-4 for installation of blades.
Figure 3-106 Attach (CHS2UG B-US) and (CHS2UG E) Chassis to Rack