Issue 3.0
5-48 Installing DT Series Digital and IP Multiline Terminals
2. Install the Line Cord in the groove. Refer to Figure 5-38 Line
Cord Groove (DT400).
3. Turn the terminal over and place it so the Line Cord can be
passed through the groove between the tilt legs. Refer to
Figure 5-36 Line Cord Groove Back of Terminal (DT300) on
page 5-47.
Figure 5-37 Installing the Line Cord (DT400)
Figure 5-38 Line Cord Groove (DT400)
To Next Page
Loading...
