SV9100 System Hardware Manual 5-1
Chapter 5
UNIVERGE
®
SV9100
Installing DT Series Digital and IP
Multiline Terminals
SECTION 1 GENERAL DESCRIPTION
This chapter provides information about the DT series Digital and IP terminals in
addition to the single line telephones, cordless telephones and wireless telephones.
Only the DT series, single line telephones, cordless telephones and wireless
telephones discussed in the document can be installed on the SV9100 system.
Table 5-1 Terminal Category Reference Chart on page 5-1 provides a quick
reference of the DT series Digital and IP multiline terminals.
To avoid damage to equipment, do not install the D
term
70 on the SV9100
system. The D
term
70 (DTU/DTP) terminal uses -24V and has no protection
from the -48V power supply used by the SV9100 system.
Table 5-1 Terminal Category Reference Chart
Series Name
Equipment
ID
Comments
DT300 Series
Digital
Terminal
(TDM)
DT310
(Economy)
DTL-2E-( )
DTL-6DE-( )
DTL-12E-( )
Economical terminal providing access to basic telephony and messaging
service
Fully functional keypad providing standard business functions such as hold,
transfer, speaker, microphone and other features
2-button terminal is non-display
6-button terminal equipped with LCD and full-featured keypad
12-button terminal is non-display
Available in black
DT330
(Value)
DTL-8LD-( )
DTL-12D-( )
DTL-24D-( )
DTL-32-D-( )
8-button DESI-Less LCD telephone
Also available are 12-, 24-, 32-button LCD telephones
Provides access to more sophisticated system features and allowing room for
growth
All DT 330s come with a standard LCD display, full duplex speakerphone
capability, module support for expansion and feature add-on capability
Optional 60-button DSS Console provides 60 programmable keys and provides
users a Busy Lamp Field (BLF) and 1-button access to extensions, trunks, and
system features
Available in black and white
DTL-12BT( )
Bluetooth available in black
DTL-12PA( )
Power Save Adapter provides backup for analog trunk connection
To Next Page
Loading...
