Issue 3.0
SV9100 System Hardware Manual 7-15
2.3 AP300/AP400
The IP DECT AP300/AP400 Access Points connect directly to the IP network and
can be used on both NEC platforms as well as different PBX platforms using a SIP
interface.
2.3.1 Connecting the Base Station
If your network connection does not provide Power Over
Ethernet, contact customer service to order a base station AC
adapter and a standard Ethernet-to-PoE adapter.
Figure 7-15 AP300/AP400 with PoE Adapter
To Next Page
Loading...
