NEC Univerge SV9100 - Table 4-42 GCD-RGA Ethernet Connector Pin-Outs

Issue 3.0
4-104 Installing the SV9100 Blades
6.4.6 Connectors
10/100/1000 BASE-TX Ethernet Interface
The PVA2 card provides five 10/100/1000 Ethernet interfaces. The
LAN ports are used for the local area network connections. The WAN
port is used for connecting to other networks or ISP (refer to Table
4-42 GCD-RGA Ethernet Connector Pin-Outs).
Table 4-42 GCD-RGA Ethernet Connector Pin-Outs
View Pin No. 10/100 Signal 1000 Signal Note
1Tx+ A+
10BASE-T/100BASE-TX/1000BASE-T port
2Tx- A-
3 RX+ B+
4NC C+
5NC C-
6 RX- B-
7NC D+
8NC D-