NEC Univerge SV9100 - Figure 5-121 Attach DSS WM-L UNIT Using Screws; Figure 5-122 Attach DSS WM-L UNIT to Wall Plate

Issue 3.0
SV9100 System Hardware Manual 5-103
1. Attach the DSS WM-L UNIT to the wall using six screws or,
using two wall mounted screws (refer to Figure 5-121 Attach
DSS WM-L UNIT Using Screws).
5.2.14.2 Mount DCL-60-1/DCZ-60-2 CONSOLE on Wall Plate
using DSS WM-L UNIT
1. Locate the screw holes on the base and hang the cover over
the screws on the wall plate as illustrated in Figure 5-122
Attach DSS WM-L UNIT to Wall Plate.
 Because of variation in wall plates, this method is not
recommended.
Figure 5-121 Attach DSS WM-L UNIT Using Screws
Figure 5-122 Attach DSS WM-L UNIT to Wall Plate