NEC Univerge SV9100 - Figure 5-81 Attaching Directory Card to Directory Card Holder; Figure 5-82 Attaching Directory Card Holder to the Multiline Terminal

Issue 3.0
5-78 Installing DT Series Digital and IP Multiline Terminals
2. Locate the two grooves on the top of the telephone as illustrated in
Figure 5-82 Attaching Directory Card Holder to the Multiline Terminal.
Push the directory card holder into the grooves on the multiline
terminal until they snap into place.
 To remove the directory card, press the two sides of the directory
card holder inward until the tabs release and pull the holder out of
the grooves.
Figure 5-81 Attaching Directory Card to Directory Card Holder
Directory Card
Directory Card
Holder
Figure 5-82 Attaching Directory Card Holder to the Multiline Terminal