Issue 3.0
SV9100 System Hardware Manual 6-11
3. Place the charging unit on the posts of the wall screws and push down until
it is firmly seated.
4. Plug the AC adapter into a standard 120 Vac wall outlet. Refer to Figure
6-16 Placing the Charging Unit on the Wall.
2.8 Attaching and Removing the Belt Clip
A belt clip can be used to attach the handset to a belt or pocket for convenient
portability.
1. Slide the clip into the tab slots. Press firmly until it snaps into place. The belt
clip fits snugly onto the handset.
Figure 6-16 Placing the Charging Unit on the Wall
Figure 6-17 Attaching the Belt Clip to the Handset
To Next Page
Loading...
