NEC Univerge SV9100 - Table 4-44 GCD-SVR2 LAN Connector Pin-Outs

Issue 3.0
SV9100 System Hardware Manual 4-111
6.6.4.1 USB Interface
The GCD-SVR2 provides four USB interfaces that can be used
for the following type of devices:
 USB Keyboard and mouse
 USB Memory Device
6.6.4.2 VGA Display Interface
The GCD-SVR2 blade provides a VGA display interface
through a standard DB-15 connector.
6.6.4.3 10 Base-T/100 Base-TX/1000 Base-T Ethernet
Interface
The GCD-SVR2 blade provides two 10 Base-T/100 Base-TX/
1000 Base-T Ethernet interface through an RJ-45 connector.
Some possible uses for the LAN port are the following:
 Software Update
 Application Configuration
Table 4-44 GCD-SVR2 LAN Connector Pin-Outs shows
the pin-outs for the RJ-45 connector.
Table 4-44 GCD-SVR2 LAN Connector Pin-Outs
LAN Connector – (RJ45)
(10Base-T/100Base-TX)
Pin No. Connection
1Tx+
2Tx-
3Rx+
4NC
5NC
6Rx-
7NC
8NC
1 8