Issue 3.0
6-12 Installing SV9100 Cordless Telephones
2. To remove the clip, press the retaining clip in toward the belt clip blade and
slide the clip up at the same time.
2.9 Installing the Handset Battery Pack
Before installing batteries, refer to D
term ®
Cordless DECT Owner’s Manual
Specifications and Battery Safety. It is important to follow safety regulations when
handling batteries.
1. Remove the battery cover by pressing the latch and sliding the cover down
and off of the handset.
Figure 6-18 Removing the Belt Clip
Figure 6-19 Removing the Battery Cover
To Next Page
Loading...
