NEC Univerge SV9100 - Figure 5-123 Plug Cable into Wall; Figure 5-124 Plugging Cable into DCL-60-1;DCZ-60-2 CONSOLE

Issue 3.0
5-104 Installing DT Series Digital and IP Multiline Terminals
2. Plug one end of the line cord into the wall receptacle. Leave
about eight inches of cord and bundle the rest.
3. Plug the opposite end of the line cord into the DCL-60-1/
DCZ-60-2 CONSOLE as illustrated in Figure 5-124 Plugging
Cable into DCL-60-1/DCZ-60-2 CONSOLE.
Figure 5-123 Plug Cable into Wall
Figure 5-124 Plugging Cable into DCL-60-1/DCZ-60-2 CONSOLE