NEC Univerge SV9100 - Figure 9-90 USB Key Error - Call Manager

Issue 3.0
SV9100 System Hardware Manual 9-109
5. If the Manager cannot find a license dongle, the window in
Figure 9-90 USB Key Error – Call Manager displays.
6. Click on the Close button. Call Manager application
launches.
7. From Settings select License Server.
8. Enter the IP address of your PBX, then click OK.
9. Shut down the application.
10. Double-click on the D
term
VSR Call Manager icon.
12.5.2.2 USB Dongle
This method requires the use of a NEC IP/Digital application
security key (USB dongle shipped with the application) and
inserted when the Manager is running.
Figure 9-90 USB Key Error – Call Manager
CAUTION
❍ The Application Security Key is associated with
your Software license.
❍ The Application Security Key is non-transferable
and cannot be replaced if lost.
❍ If the key becomes damaged within the warranty
period, you must return your key to support for
verification and replacement if the nature of the
damage qualifies