NEC Univerge SV9100 - Table 4-41 GCD-RGA Status Leds

Issue 3.0
SV9100 System Hardware Manual 4-103
6.4.4 Status LEDs
The table below shows the user-level description of the front panel
LEDs in RGA mode.
6.4.5 LED Indications
Active LED – Red/Green
The Active LED is controlled by the DSP and indicates the board
operational status. The LED has red/green capability.
 Reset: red solid on, green solid on.
 GCD-CP10 not detected: solid green.
 DSP waiting for application code download: flash green once per
second.
 Router application running: flash green twice per second.
 Voice processor not running: flash red and green (orange) twice per
second.
 Third party application running: flash green five times per second.
Busy/App LED – Red/Green
The Busy/App LED is controlled by the main processor and indicates the
port status. The LED has red/green capability.
 Reset or main processor boot problem: red solid on, green solid on
(orange).
 Main processor booting: solid green.
 Router application communicating on backplane: off.
 One or more ports active after third party application running: solid
red.
Table 4-41 GCD-RGA Status LEDs
Reset
Reset Just
Released
Booting
OS
OS
Running
Running with
0 License
Apps
Licensed
APP on
RGA
Licensed
APP is
Running
Licensed
App has
Port Busy
Bus LED Red Red Green Green Green Off Off Red
Run LED Orange SF SF MF FF MF FF FF
SF
MF
FF
Slow Flash
Medium Flash
Fast Flash