NEC Univerge SV9100 - Figure 9-117 PSA-L UNIT Connections

Issue 3.0
9-134 Installing SV9100 Optional Equipment
13.5.1 Installing the PSA-L Adapter
1. Turn multiline terminal upside down.
2. Unplug the line cord and handset cord from the multiline terminal.
3. Lower the tilt leg to the first position (refer to Figure 9-118 Separate
Tilt Leg from Leg Support on page 9-135).
Figure 9-117 PSA-L UNIT Connections
DTMF/DP
PSTN
WARNING
BEFORE INSTALLING OR REMOVING the PSA-L adapter,
remove the line cord, LAN cable, and then AC adapter from the
outlet.
IMPORTANT
Only ONE PSA-L UNIT can be attached to the DTL/ITL
multiline terminal.