NEC Univerge SV9100 - Figure 5-57 8 LK-L UNIT; Figure 5-58 Remove Side Panel from Multiline Terminal

Issue 3.0
5-62 Installing DT Series Digital and IP Multiline Terminals
5.2 DT Series Optional Terminal Equipment
5.2.1 8LK-L UNIT (BK/WH)
Provides eight additional line keys to DT series terminals (except
Economy). The unit features:
 Mounts directly to right side of terminal
 Supports Red and Green LED colors
5.2.1.1 Installing the 8LK-L UNIT
1. Remove both plastic panels from the front of the multiline
terminal.
2. Turn multiline terminal upside down.
 Only one 8LK-L UNIT can be attached to the DT Series
multiline terminal.
3. Pry the side panel from the multiline terminal.
Figure 5-57 8LK-L UNIT
WARNING
To prevent possible damage to the 8LK-L UNIT
or the DT Series multiline terminal during
installation or removal, disconnect the line
cord/LAN cable and the AC/DC adapter from the
DT Series multiline terminal.
Figure 5-58 Remove Side Panel from Multiline Terminal
Side Panel