Issue 3.0
9-42 Installing SV9100 Optional Equipment
Password
Locks access to these settings and those at the user level.
11.4 Operation Note
Use the Options and File Management tabs in the D
term ®
Voice Security
Recorder application to adjust the program settings as required (directory for
storing messages, message deletion, file format, etc.).
It is recommended, after the initial installation of the D
term
Voice Security
Recorder application, that the audio balance of the remote side be changed to
approximately 100%.
1. Open the D
term
Voice Security Recorder application.
2. Click the Options tab.
3. Using the up arrow button, change the Remote Boost (%) setting to 100%.
When changes are made, the application must be closed
and started again to become effective.
Figure 9-34 Voice Security Recorder Connection
Excessive boost can distort audio.
To Next Page
Loading...
