Issue 3.0
5-80 Installing DT Series Digital and IP Multiline Terminals
2. Pull down on the tab and lift the Numbered Keypad away
from the telephone to remove the existing button. Refer to
Figure 5-85 Removing Numbered Keypad from DT300/
DT700 Series Terminal.
5.2.6.2 Installing the Numbered Keypad
1. Slide the replacement numbered keypad into the grooves
located on the inside of the telephone, then press down on
the keypad to snap it into place. Refer to Figure 5-86 Install
New Numbered Keypad into DT300/DT700 Series Terminal.
Figure 5-85 Removing Numbered Keypad from DT300/DT700
Series Terminal
Figure 5-86 Install New Numbered Keypad into DT300/DT700
Series Terminal
To Next Page
Loading...
