Issue 3.0
6-24 Installing SV9100 Cordless Telephones
SECTION 4 BLUETOOTH CORDLESS HANDSET
4.1 Bluetooth Cordless Handset (BCH) Interface
This optional interface allows the multiline terminal user to use Bluetooth
technology to provide a cordless handset. This handset provides:
Keyset-like Handset
Eight Line Buttons
Function Button
Dial Button
Display
All Multiline Terminal Functions with Main Unit
Cradle Charges Handset
Base Side RF Block (50 meters, Class 1)
Bluetooth Distance: 50 Meters
Up to 16 devices can be installed within a 100m (open area, ex: outdoors) or 50m
(confined/blocked area, ex: indoors) radius and each device is located with 1
meter between each device simultaneously. This maximum can be affected by the
installation environment.
The BCH and a Bluetooth headset (BTH) cannot be used at the same time. When
using a Bluetooth headset in place of the handset, the Plantronics Voyager 510
headset is recommended.
Table 6-1 Firmware Compatibility Matrix
BCH-L Unit Lot Number
xxxDxx or lower xxxExx or higher
Terminal
Lot
Number
DT-330
xxx I xx or lower
(Version 8.10 and 1, E0 or lower)
Supported Supported
xxxJxx or higher
(Version 2.20 or higher)
Not supported Supported
BCH Support may differ based on terminal firmware. To verify both DT-330 terminal and BCH-
L Unit firmware, hold down keypad buttons 1, 2 and 3 while plugging the line cord into the
terminal.
To Next Page
Loading...
