NEC Univerge SV9100 - Figure 3-35 Installing Reinforcement Bracket

Issue 3.0
3-28 Installing the SV9100 Chassis
8. Using two screws, secure the Base and Expansion chassis together
with the metal reinforcement bracket provided.
Figure 3-34 Install Expansion Chassis Cover
IMPORTANT
Be sure to mount the Reinforcement Bracket with the 9.5 inch
Base and Expansion Chassis in the vertical position.
NOTE

The Reinforcement Bracket and two screws are provided with
the 9.5 inch Chassis.
Figure 3-35 Installing Reinforcement Bracket