NEC Univerge SV9100 - Chapter 7 Installing SV9100 Wireless Telephones; Figure 7-1 SIP DECT System Configuration

SV9100 System Hardware Manual 7-1
Chapter 7
UNIVERGE
®
SV9100
Installing SV9100 Wireless Telephones
SECTION 1 GENERAL DESCRIPTION
The wireless telephones provide wireless freedom that also allows access to
features provided by the UNIVERGE SV9100 system.
SECTION 2 NEC SIP DECT SOLUTIONS
The SIP Digital Enhanced Cordless Telecommunication (DECT) is a stand-alone
system that is connected to the NEC Telephone System via a TCP/IP connection
using Session Initiation Protocol (SIP). This means that in the NEC Telephone
System, the DECT extensions must be assigned as SIP extensions. From the NEC
Telephone System perspective, there is no difference between an SIP extension and
an SIP DECT extension.
Figure 7-1 SIP DECT System Configuration shows the SIP DECT System
Configuration. All connections are IP connections over Ethernet.
Figure 7-1 SIP DECT System Configuration
DAP D
A
P
D
A
P
I
P
S
w
i
t
c
h
DAP Manager
IP Switch
PVA
CPUII
IPK II
CPU
NEC System