EasyManua.ls Logo

NEC Univerge SV9100 - Figure 9-130 GBA-L UNIT

NEC Univerge SV9100
740 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Issue 3.0
9-142 Installing SV9100 Optional Equipment
13.6 Gigabit Adapter (GBA-L UNIT)
The GBA-L UNIT enables IP telephones (DT730/DT750) to operate in a Gigabit
Ethernet environment. A single Gigabit Ethernet desktop drop provides a 10/
100Mbps to the IP telephone and a gigabit connection to a personal computer.
The Gigabit Adapter is installed on the bottom of the IP telephone and offers a
gigabit interface to the LAN side and PC port. The Gigabit Adapter is powered by
PoE or can operate off of local power.
13.6.1 Installing the GBA-L UNIT
1. Turn multiline terminal upside down.
2. Unplug the line cord and handset cord from the multiline terminal.
Figure 9-130 GBA-L UNIT
WARNING
BEFORE INSTALLING OR REMOVING the GBA-L UNIT,
remove the line cord, LAN cable, and then AC adapter from the
outlet.
IMPORTANT
Only ONE GBA-L UNIT can be attached to the DTL/
ITL multiline terminal.

Table of Contents

Other manuals for NEC Univerge SV9100

Related product manuals