NEC Univerge SV9100 - Figure 3-68 Install Support Bracket (Base and Expansion Chassis)

Issue 3.0
3-56 Installing the SV9100 Chassis
5. Turn the support 90° and install the M4 x 8 screws
previously removed.
6. Attach the MV bracket (upper and lower) to the 9.5 inch
Base and Expansion chassis. Refer to section 4.2.1 Option
1 – Wall Mounting the 9.5 inch Base (CHS2UG B-US)
Chassis steps 4 through 14 for bracket installation.
Or
Figure 3-68 Install Support Bracket (Base and Expansion Chassis)