NEC Univerge SV9100 - Figure 5-55 Wall Mounting Base on Wall Plate; Figure 5-56 Wall Mounted Multiline Terminal

Issue 3.0
SV9100 System Hardware Manual 5-59
4.7.1.4 Wall Mounting the Base on a Wall Plate
1. Locate the screw holes on the base and hang the cover over
the screws on the wall plate as illustrated in Figure 5-55 Wall
Mounting Base on Wall Plate.
2. Hang the multiline terminal on the base.
 Because of variation in wall plates, this method is not
recommended.
Figure 5-55 Wall Mounting Base on Wall Plate
Figure 5-56 Wall Mounted Multiline Terminal