NEC Univerge SV9100 - Figure 9-59 Digital Call Logger Connection

Issue 3.0
9-74 Installing SV9100 Optional Equipment
12.1.7 Operation Note
Use the Options and File Management tabs in the NEC Digital Logging Unit
application to adjust the program settings as required (directory for storing
messages, message deletion, file format, etc.).
It is recommended, after the initial installation of the Voice Security
Recorder application, that the audio balance of the remote side be changed
to approximately 100%.
1. Open the Voice Security Recorder application.
2. Click the Options tab.
3. Using the up arrow button, change the Remote Boost (%) setting to
100%.
12.2 NEC 4-Port Digital Logging Unit
12.2.1 Description
The NEC 4-Port Digital Logging Units are Universal Serial Bus (USB)
devices installed in the BackOffice next to the telephone system.
Up to 12 of the 4-Port Digital Logging Units can be connected to a single PC
(providing 48 ports).
Figure 9-59 Digital Call Logger Connection
CAUTION
Excessive boost can distort audio.