NEC Univerge SV9100 - Figure 5-115 Cutouts for WM-L UNIT; Figure 5-116 WM-L UNIT Tabs

Issue 3.0
SV9100 System Hardware Manual 5-99
4. Align the four cutouts on the bottom of the multiline terminal
(refer to Figure 5-115 Cutouts for WM-L UNIT) with the tabs
on the WM-L UNIT (refer to Figure 5-116 WM-L UNIT Tabs).
Figure 5-115 Cutouts for WM-L UNIT
Figure 5-116 WM-L UNIT Tabs
Tab s
Tab s