Issue 3.0
SV9100 System Hardware Manual 4-51
4.6 GPZ-4LCF/GPZ-8LCF (4-Port/8-Port SLI Daughter Board)
4.6.1 Description
The GPZ-4LCF and GPZ-8LCF daughter boards are mounted on the
GCD-4LCF/GCD-8LCF. These boards provide:
4-Port Single Line and 8-Port Single Line analog extension ports
(used for on-premise analog telephones, fax machines, and analog
modems).
The GCD-4LCF/GCD-8LCF is not rated for OPX use. A
GCD-4DIOPA blade should be used instead (it supports the analog
DID and single line telephone interface functions, such as Off-
Premise Extensions).
Connector for GCD-4LCF and GCD-4LCF Blades
Ring Generator
Caller ID Sending Ability
Message Wait Lamp Ability
Constant current type battery feeding (25mA / -28Vdc)
Feeding Polarity Reverse Ability
Figure 4-19 Installing the GPZ-4LCF/GPZ-8LCF Daughter Board
To Next Page
Loading...
