EasyManua.ls Logo

NEC Univerge SV9100 - Figure 9-152 IVR Server Chassis - Front View; Table 9-6 External Server - LED Indications

NEC Univerge SV9100
740 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Issue 3.0
SV9100 System Hardware Manual 9-159
SECTION 15 IVR – EXTERNAL SERVER
The IVR Server is an optional server interface supporting the following:
670201 Appointment Reminder
670203 Broadcast
This server connects to the SV9100 through Standard SIP Ports and requires the
IPLE to be installed in the SV9100. NEC recommends the server and the SV9100 be
plugged into the same managed data switch.
15.1 IVR Server Chassis
15.1.1 Front View
The control panel located on the front of the chassis has five LED’s
providing the user with critical information related to different parts of the
system. Refer to Table 9-6 External Server – LED Indications for an
explanation of each LED when illuminated.
Figure 9-152 IVR Server Chassis – Front View
Table 9-6 External Server – LED Indications
LED
Indication
Condition Comments
Indicates an overheat condition, which may be caused
by cables obstructing the airflow in the system or the
ambient room temperature being too warm.
This LED will remain lit as
long as the condition exists.
Indicates network activity on LAN Interface 1.
Indicates network activity on LAN Interface 2.

Table of Contents

Other manuals for NEC Univerge SV9100

Related product manuals