NEC Univerge SV9100 - Figure 7-12 ML440 - Handset Charger; Figure 7-20 ML440 Handset - Front View; Figure 7-21 ML440 - Handset Charger

Issue 3.0
SV9100 System Hardware Manual 7-21
2. Insert the appropriate anchors for the wall material.
3. Insert the mounting screws into the anchors, leaving about ¼ inch of space
between the screw head and the wall.
4. Connect the Ethernet cable and route the cord (refer to Figure 7-19 Base
Station Dimensions on page 7-20).
5. Place the base over the screw heads and slide it down into place.
3.3 Handset and Charger
Figure 7-20 ML440 Handset – Front View provides a front view of the handset.
Figure 7-21 ML440 – Handset Charger on page 7-22 provides a top view of the
charger.
Figure 7-20 ML440 Handset – Front View