Issue 3.0
SV9100 System Hardware Manual 5-63
4. Return the multiline terminal to the buttons side up position.
5. Fit the projections on the side of the 8LK-L UNIT into the
guide holes on the side of the multiline terminal.
6. Secure the 8LK-L UNIT with the two screws provided.
7. Turn the multiline terminal upside down.
8. Open the small door covering the side option connectors by
pulling the cover handle to the front.
9. Connect the cable from the 8LK-L UNIT to the side option
connector (see Figure 5-60 Install the 8LK-L UNIT Cable) on
the multiline terminal and close the cover.
10. Attach the side panel to the side of the 8LK-L UNIT.
11. Return the multiline terminal to the buttons side up.
12. Complete the installation by reattaching both plastic panels
to the front of the multiline terminal.
Figure 5-59 Securing the 8LK-L UNIT with Screws
Figure 5-60 Install the 8LK-L UNIT Cable
Telephone
Connection Cable
Side Option
Connector
Cover
To Next Page
Loading...
