NEC Univerge SV9100 - Table 5-18 Keypad Kit Type; Table 5-19 Line Key Kit Type

Issue 3.0
SV9100 System Hardware Manual 5-85
6. Press the Up/Down key to select the keypad kit.
7. Press 4 for Next.
8. Press the Up/Down key to select the line key kit.
 By default, the correct line key kit for the keypad kit
selected above is highlighted.
9. Press Softkey for OK to complete.
10. Continue pressing Softkey to exit (Exit-Exit-Save). The
terminal resets automatically.
Table 5-18 Keypad Kit Type
Keypad Kit Entry Description
Kit1
Type A – Japan with cursor key
Kit2
Type A – US with cursor key
Kit3
Type B – US with cursor key
Kit4
–
Kit8
32 Line Key without cursor key
Kit9
Type A – Japan without cursor key
Kit10
Type A – US without cursor key
Kit11
Type B – US without cursor key
Kit12
–
Table 5-19 Line Key Kit Type
Line Key Kit Entry Description
Kit12
Enhanced 12-Button
Kit24
Enhanced 24-Button
Kit32
Enhanced 32-Button
Kit8
DESI-Less
Kit6
Value 6-Button
Kit2
Value 2-Button
Kit0
IP-CTS