NEC Univerge SV9100 - Figure 6-55 Unpairing a Device; Figure 6-56 Setting Visibility Option

Issue 3.0
SV9100 System Hardware Manual 6-41
5.1.2.4 Connecting the Paired Device
Enable the Bluetooth device. Select [2 Enable] in the Connect
screen.
5.1.2.5 Unpairing
To unpair a paired the Bluetooth device, select the device in the
[Delete] screen.
5.1.2.6 Visibility Setting
Set to Disable (default: [1. Disable]).
CAUTION
After pairing a Bluetooth device, be sure to
configure its connection to enable it. If settings
are not completed, the Bluetooth device that does
the pairing cannot be used.
Figure 6-54 Connecting the Paired Device
Figure 6-55 Unpairing a Device
Figure 6-56 Setting Visibility Option