NEC Univerge SV9100 - Figure 3-73 Install Upper Bracket (Option 2); Figure 3-74 Install Lower Bracket (Option 2)

Issue 3.0
3-60 Installing the SV9100 Chassis
2. Align holes E and F on the MV bracket (upper) with holes on the 9.5
inch Basic Chassis (CHS2UG B-US). Install 2 M4 x 14 screws.
M4 x 14 screws are provided with the WALL MOUNT BRACKET.
3. Align holes G and H on the MV bracket (lower) with holes on the 9.5
inch Basic Chassis (CHS2UG B-US). Install 2 M4 x 14 screws.
M4 x 14 screws are provided with the WALL MOUNT BRACKET.
Figure 3-73 Install Upper Bracket (Option 2)
Figure 3-74 Install Lower Bracket (Option 2)